This feature only works if you have 2 handsets registered to the base unit.
1.Press INT on the first handset.
2.Press 
or 
to select the desired handset or choose “CALL ALL”.
3.Press TALK to place the call. The selected handset will ring. If you select “CALL ALL”, all other handsets registered to the base unit will ring. If the
| selected handset is not available (off hook, on another call), “BUSY” shows. | |
4. | To accept the intercom call on the handset, press | TALK. |
5. | To exit intercom mode on the first handset, press | TALK. |
Note: During the first handset calls the other handsets, there may be an incoming call in which the first handset will hear a call waiting tone and the other handset will return to normal incoming call tone.
Intercom ring tone
You can change the ring tone for an intercom call to differentiate internal from
external calls. To change the ring tone please see the Handset Ring Tone Setting section on page 12 for more information.
Call toggling
This feature only works if you have 2 handsets registered to the base unit. The feature allows you to put an external call on hold while you place an intercom call to another handset. Only the handset that initiates call toggling can place callers on hold or end the call.
1.Establish contact with an external party by either placing a call or answering an incoming call.
2.Press INT to put the external call on hold and enter intercom mode.
3. Press the number | or |
keys to select the handset. |
|
4.Press TALK to place an intercom call to the selected handset. “H” shows on the display to indicate the external call is on hold.
5.Press INT key on the handset that initiates call toggling to place the intercom on hold and return to the external call.
6.Press TALK key on the selected handset to end the intercom call and return to the external call.
Note : If the selected handset is not available, “BUSY” shows and then a callback is generated. “CALL BACK” is displayed on the handset display. You can press TALK to return to the caller.
22
