Moxa Technologies G2150I manual Phonebook Character Set +WPCS, Request Imsi +CIMI

OnCell G2150I AT Command Set General Commands

Phonebook Character Set: +WPCS

Description: This specific command informs the ME which character set is used by the TE for the phonebooks. The ME can convert each character of entered or displayed strings. This is used to read or write phonebook entries (parameters <text>, <address>, and <mail>). You may also refer to the definition of +CSCS above.

Command syntax: AT+WPCS=<Character Set>

Command	Possible responses
AT+WPCS=“TRANSPARENT”	OK
Note: Transparent mode	Note: Command valid
AT+ WPCS =“CUSTOM”	OK
Note: Custom character set	Note: Command valid
AT+WPCS=?	+WPCS:(“TRANSPARENT”,”HEX”,”CUSTOM”)
Note: Get possible values	OK
	Note: Possible values

Defined values: <Character Set>

“TRANSPARENT”	Transparent mode. The strings are displayed and entered as they
	are stored in SIM or in ME.
“CUSTOM”	User defined character set (cf. +WCCS command).
“HEX”	Hexadecimal mode. No character set used; the user can read or
	write hexadecimal values.

Request IMSI: +CIMI

Description: This command is used to read and identify the IMSI (International Mobile Subscriber Identity) of the SIM card. The PIN may need to be entered before reading the IMSI.

Command syntax: AT+CIMI

Command	Possible responses
AT+CIMI	208200120320598
Note: Read the IMSI	OK
	Note: IMSI value (15 digits), starting with MCC (3digits) /MNC
	(2digits, 3 for PCS 1900)

See appendix 19 Codes and values for MCC / MNC description.

Defined values: No parameters

Card Identification: +CCID

Description: This command orders the product to read the EF-CCID file on the SIM card.

Command syntax: AT+CCID

Command	Possible responses
AT+CCID	+CCID:”123456789AB111213141”
Note: Get card ID	OK
	Note: EF-CCID is present, hexadecimal format
AT+CCID?	+CCID:”123456789AB111213141”
Note: Get current value	OK
	Note: Same result as +CCID

3-4