Icom IC-R5 instruction manual Tone Squelch and Pocket Beep, Tone/DTCS squelch operation, Step y

8 TONE SQUELCH AND POCKET BEEP

■Tone/DTCS squelch operation

The tone or DTCS squelch opens only when receiving a sig- nal with the same pre-programmed subaudible tone or DTCS code, respectively. You can silently wait for the specified sig- nal using the same tone.

qSet the desired frequency in FM mode.

wPush [TS•SET] for 1 sec. to enter set mode. eRotate [DIAL] to select “EXPAND” item.

rWhile pushing [FUNC], rotate [DIAL] to turn the expanded set mode ON.

tRotate [DIAL] to select “TSQL” item.

yWhile pushing [FUNC], rotate [DIAL] to select the desired subaudible tone condition from “TSQL,” “P BEEP,” “DTCS,” “P DTCS” and “OFF.”

Tone squelch selection	Tone squelch with pocket
	beep function selection

uPush [TS•SET] to exit set mode.

•One of “TSQL,” TSQLS,” “DTCS” or “SDTCS” appears ac- cording to the tone selection in the step y.

FMT SQLP SKIPFMT SQL P SKIP

Tone squelch selection		Tone squelch with pocket
		beep function selection
FM	DTCS P SKIP	FM	DTCS P SKIP
DTCS selection		DTCS with pocket beep
		function selection

iWhen a signal with the matched tone is received, the squelch opens and the receiver emits audio.

When pocket beep function is activated, the receiver also emits beep tones and blinks “S”.

• Beep tones sound and “S” blinks for 30 sec.

		oPush [FUNC] to stop the beeps and blinking manually.
		• “S” disappears and the pocket beep function is deactivated.
		!0To cancel the tone squelch or DTCS, select “OFF” with the
		“TSQL” item in the expanded set mode, as described in the
DTCS selection	DTCS with pocket beep	step y.
	function selection

35