Icom IC-R5 Selecting a memory channel, Lock function, Push V/MS.MW~ to select the memory mode

■Selecting a memory channel

qPush [V/M•S.MW•~] to select the memory mode.

• “ ” appears when a memory channel is selected.

wRotate [DIAL] to select the desired memory channel.

•Only programmed memory channels can be selected.

•While pushing and holding [FUNC], rotate [DIAL] to select a memory channel in 10 channels steps.

[DIAL]

FM

[FUNC]

[V/M•S.MW•~]

[DIAL] changes the mem- ory channel.

FREQUENCY AND CHANNEL SETTING 3

■ Lock function

To prevent accidental frequency changes and unnecessary
function access, use the lock function.	3

➥While pushing [FUNC], push [BAND•] for 1 sec. to turn the lock function ON and OFF.

•“ ” appears while the lock function is activated.

•[SQL] and [Y]/[Z] can be used while the lock function is in use with default setting. Either or both [SQL] and [Y]/[Z] keys are also be locked in set mode. (p. 43)

FM P SKIP

[FUNC] VOL

[BAND• ]

“ ” appears while the lock function is in use.

10