Icom Efficient Skip Channel and Frequency Settings for Your Marine Radio

■Skip channel/frequency setting

Memory channels can be set to be skipped for memory skip scan. In addition, memory channels can be set to be skipped for both memory skip scan and frequency skip scan. These are useful to speed up the scan interval.

qSelect a memory channel:

➥Push [V/M•S.MW•~] to select memory mode.

➥Rotate [DIAL] to select the desired channel to be a skip channel/frequency.

wPush [V/M•S.MW•~] for 1 sec. to enter select memory write condition.

ePush [MODE•SCAN] several times to select “SKIP” item.

•While pushing [MODE•SCAN], rotating [DIAL] can also select “SKIP” item.

[DIAL]

• Skip setting

[MODE•SCAN]

SCAN OPERATION 6

rWhile pushing [FUNC], rotate [DIAL] to select the skip con- dition from “SKIP,” “PSKIP” or “OFF” for the selected chan-

nel.

• SKIP	: The channel is skipped during memory or bank scan.
• PSKIP : The channel is skipped during memory/bank scan and
	the programmed frequency is skipped during VFO scan,
	such as programmed scan.
		6
• OFF	: The channel or programmed frequency is scanned dur-

ing any scan.

tPush [MODE•SCAN] several times, or while pushing and holding [MODE•SCAN] rotate [DIAL] to select “S.MW” item.

yPush [V/M•S.MW•~] for 1 sec. to set the skip condition.

•“SKIP” or “P SKIP” indicator appears, according to the skip se- lection in the step r.

• Skip channel setting		• Program skip setting
FM	SKIP	FM	P SKIP
	“SKIP” appears		“P SKIP” appears

✔CONVENIENT!

The skip setting can also be set with the following operation for easy setting.

qSelect the desired memory channel to be set as a skip channel/frequency.

wWhile pushing [FUNC], push [V/M•S.MW•~] to select the skip condition from “SKIP,” “P SKIP” and “OFF (no indication).”

30