Silent ring
C OK | Press the OK button. |
1Press the 1 button.
Note
The system code can also be changed from your computer by using the BT
▲
▼
C OK
Use the UP or DOWN button to select
1for ringer active or 2 for silent ring.
The display will show the symbol to indicate a silent ring.
Press OK to confirm.
Base station priority
If you are using more than one base, you can select which base your handset will use, when it is in range of more than one base to which it is registered.
Ringer melody
To change your System Code
Intercom
C OK
DEF
Press the OK button.
Press the 3 button.
Press the INTERCOM button.
3
▲
▼
C OK
Use the UP or DOWN button to select the melody you require.
Press OK to confirm.
C OK
DEF
3
1
OLD
CODE
Press the OK button. F1 will appear on the display.
Press the 3 button followed by the
1button.
Enter existing code (default setting 0000). As you enter each digit in turn
Base settings
System Code
Your base station has a default setting of 0000 but you may want to change this.
the dash will stop flashing. When you have entered four digits all four dashes will then start flashing again.
NEW Enter your new System Code. As you
CODE | enter each digit in turn the dash will |
| |
| again stop flashing. |
If you change your System Code keep a record of the new number by writing it in the space provided on page 8.
CONFIRM
CODE
C OK
Enter your new System Code again.
Your system code is changed. You will hear a beep if you have entered the wrong current system code or if your new system codes do not match.
Press the C button twice to exit.
31