BT 1800 manual Registering additional handsets, Handset’s user guide, On the handset

Registering additional handsets

If you purchase new handsets to use with your current BT On-Air 1800, they will not be pre-registered to a base station. You will need to do this before you can use them.

Note

The instructions for registration and de-registration in the following pages are for BT On-Air Classic handsets. If you have purchased another model, refer to your

Custom registration

(if you have changed the System Code from 0000)

If you have changed the base's system code from the default 0000 or if your handset is registered to a base and you also want to register it to another base, you must use Custom Registration.

At the base:

ip	Press and hold down the  Skip button
◀
Sk
	until the PLAY button starts to flash.

handset’s user guide.

Quick registration

(if you have not changed the System Code from 0000)

C OK

WXYZ

9

▲

▼

On the handset:

Press the OK button.

Press the 9 button.

Use the UP or DOWN button to select the base number (this number is shown as the RFPI on the underside of the base).

This automatically registers the new base as Base 1 and will replace any existing Base 1 registration.

If you have already changed the base’s System Code from the default 0000, you will need to follow the instructions below for Custom Registration.

At the base:-

S		Press and hold down the		Skip button
◀
kip
		until the PLAY button starts to flash.
		On the handset:-
C	OK	Press the OK button.
M		Press the 6 button.
NO
6

The handset will now automatically register with the handset number.

C OK Press the OK button.

CODE Enter the System Code.

Wait until the available handset numbers appear. ie. 456. Then press the handset number you want.

43