BT 1800 manual Paging handsets, Internal calls

To insert a pause when storing a number in the memory

	Press and hold the 0 button until a /
0
	appears on the point where you want
	to enter a pause. The / indicates a
	pause, therefore, when you dial the

C OK

1 2 3

COK

C OK

Press the C button to clear and back space the numbers. Edit entries by using the numbers on the keypad.

Press OK to confirm.

Press the C button to return to idle.

number stored, your On-Air 1800 will

automatically insert the pause where

it was stored.

To dial a number from the memory

▲Press the UP or DOWN button to

▼	display the number you wish to dial.
	Press the GREEN PHONE button to
	dial the number.
	Or
	Quickdial:
1 2 3	Enter the number of the memory
	location you wish to dial and press #
	(e.g. Press 1 then # from idle to dial
	the phone number stored in memory
	location 1).

To edit and delete memory numbers

▲Press the UP or DOWN button. The ▼ display will show MEM --.

Paging handsets

You can alert handset users that they are wanted, or locate a missing handset. (Paging calls cannot be answered by a handset.)

To page a handset from the base

Skip ▶	Press and hold the Skip  button on
	the base until the handset starts to
	ring. All handsets registered with the
	base will ring.
Skip ▶	To end paging, press and hold the
	Skip  button again.

Internal calls

If you have multiple handsets registered to a base you can make internal calls between handsets.

You can make an internal call while using the BT On-Air USB unit to connect to the Internet.

▼

C OK

1 2 3

C OK

Use the DOWN button to scroll to the required memory number and press OK.

Or

Enter the number of the memory location and press OK.

Note

If you dial the number for the BT On-Air USB unit, you hear an engaged tone.

27