BT 1800 Using a BT On-Air USB unit with more than one base, At your computer, Click Register

Using a BT On-Air USB unit with more than one base

Your BT On-Air USB unit can be registered on up to four bases. With a laptop computer this allows you to connect to the Internet without wires at up to four geographically separate locations.

Your BT On-Air USB unit supplied is pre-registered (as Nb 6) to its base (as Base 1).

Important

1

2

3

➜Enter a name for the base to be displayed on your computer.

➜Enter the system code for the base. (Default setting = 0000)

The BT On-Air USB unit can only be registered to a BT On-Air 1800 base. Other base stations in the BT On-Air range are not compatible with the USB unit. See web site www.bt.com/on-air for latest compatibility information.

Skip ◀

➜

At the base:

Press and hold the  Skip button until the Play button starts to flash.

At your computer:

Click OK to confirm.

To register a BT On-Air USB unit to a base

If you want to use your BT On-Air USB unit with another base, you will first need to register it on that base.

At your computer:

➜Click the BT On-Air icon in the system tray to open the Monitor.

1

➜Click Register.

Display shows the Searching message box.

After a short while the display shows a confirmation message box and the BT On-Air USB unit is registered.

This can take up to 2 minutes.

Display then shows:

1

➜Click OK to return to main Monitor screen.

45