BT 1800 manual To rename a base, Signal quality, Register to base, About BT On-Air, Close

3. Signal quality

To rename a base

The signal indicator shows if your BT On-Air USB unit is in range of the base. If you get a very poor signal, it could cause problems when connecting to the Internet. Try moving closer to the base or changing the position of the

BT On-Air USB unit.

You can change the name of a base, for instance to indicate its location. The name is stored in your computer, not in the base itself.

➜Click the BT On-Air icon in the system tray to open the Monitor.

Note

When you are happy with the signal strength, attach your USB unit to your computer using the sticky pad provided.

If you experience interference on your computer screen or other electrical equipment while using your BT On-Air USB unit, try moving the unit slightly away from the equipment which is experiencing interference.

4. Register to base

Click on Register if you want to register your USB unit to a new, compatible base. See page 43.

5. About BT On-Air

Click on the tab to display version information for

your product. It also displays the Identity of the base (RFPI) which is printed on the label underneath the base.

6. Close

The Monitor must be closed before making an Internet connection.

1

➜Click Rename.

1

2

➜Enter the new name you want.

➜Click OK to confirm.

➜Click Close to close the Monitor screen.

22