BT 1800 manual To change the system code, To uninstall BT On-Air from your computer

To change the system code

You can use the BT On-Air Monitor to change the base system code. (You can also use the handset to change the code, see page 31.)

➜Click the BT On-Air icon in the system tray to open the Monitor.

1

➜Click Change system code.

1	4
2

3

➜Enter the current system code. (Default setting = 0000)

➜Enter the new system code twice.

➜Click OK.

A confirmation screen appears after a few seconds.

1

➜Click OK.

If you see a message saying the code change was unsuccessful, see Help “General check”, page 48.

➜Click Close to close the Monitor screen.

To uninstall BT On-Air from your computer

Important

Before uninstalling, close any active Internet connection and unplug the BT On-Air USB unit from the port on your computer.

After uninstalling the software, you will not be able to use your BT On-Air until you install it again.

1

Open the Windows Start menu by clicking the Start button normally located at the bottom left of your screen.

➜Click Settings.

➜Click Control Panel. The Control Panel is displayed.

Helpline

If you are experiencing difficulty, please call the BT On-Air Helpline on 0845 300 0156.

23