BT 1800 manual To deregister a BT On-Air USB unit, Click De-register

Note

A warning message will appear if registration failed. Check that:

–the base is switched on and set-up correctly

–the BT On-Air USB unit is plugged into a USB port on your computer.

–the correct system code is entered.

–the USB unit is not already registered.

Your computer may be too close to the base. See Help, page 48.

Note

Registration information is stored in the BT On-Air USB unit. If you install it on another computer, this computer will be able to access all the BT On-Air 1800 bases to which your BT On-Air USB unit is registered.

Note

If you have registered your BT On-Air USB unit with more than one base, and move from one to another while not connected to the Internet, the modem will log on the base automatically.

If you move out of range of a base while still connected to the Internet, the connection will be broken.

To deregister a BT On-Air USB unit

You can deregister your USB unit from the base.

Click the BT On-Air icon in the system tray to open the Monitor.

➜

➜

➜

➜

1

Click De-register.

1

2

Enter the system code for the base (default = 0000).

Click OK.

Once de-registered, the screen displays the BT On-Air Monitor window. The base is removed from the list.

You must now register to a new base to connect to the Internet via your BT On-Air.

Click Close to close the Monitor screen.

If you see a message saying de-registration was unsuccessful, see Help “General check”, page 49.

46