Icom IC-R5 instruction manual Transferring memory contents

5 MEMORY CHANNELS

■Transferring memory contents

Contents of programmed memory channels can be trans- ferred to another memory.

qPush [V/M•S.MW•~] for 1 sec. to enter select memory write condition.

•1 short and 1 long beeps sound.

•“ ” indicator and memory channel number blink.

•Do not hold [V/M•S.MW•~] for more than 2 sec. otherwise the memory contents will be copied to VFO.

wRotate [DIAL] to select the desired memory channel to be transferred.

eWhile pushing [MODE•SCAN], rotate [DIAL] to select “CLEAR” item.

•Pushing [MODE•SCAN] several times also “CLEAR” item is se- lectable.

rPush [V/M•S.MW•~] for 1 sec.

•The displayed contents are cleared.

CONVENIENT!:

Instead of the steps e and r operations, while pushing

and holding [FUNC], push [V/M•S.MW•~] for 1 sec. also clearing the contents.

tRotate [DIAL] to select the desired target memory channel. yPush [V/M•S.MW•~] for 1 sec. to transfer the contents.

[DIAL]

[V/M•S.MW•~] [MODE•SCAN]

[FUNC]

•Example— Transferring the contents of memory channel 20 to channel 30.

Steps q and w

FM DUP T SQL

Step e

Step r

Step t

Step y

FM DUP T SQL

23