Icom IC-R5 Scan Operation, Scan types, Full Scan p, FREQUENCY/MEMORY Skip Function p

6 SCAN OPERATION

■Scan types

Scanning searches for signals automatically and makes it easier to locate new stations for contact or listening purposes.

FULL SCAN (p. 26)			Repeatedly scans all frequen-
150			cies over the entire band.
		1303.995
	kHz	MHz
			Some frequency ranges are
	Scan		not scanned according to the
	Jump		frequency coverage of the re-
			ceiver’s version.

There are 7 scan types and 4 resume conditions to suit your operating needs.

SELECTED BAND SCAN		Repeatedly scans all frequen-
(p. 26)		cies over the entire selected
Band	Band	band.
edge	edge

Scan

Jump

PROGRAMMED SCAN

(p. 26)

Band	Scan edges	Band
edge	xxA	xxB edge
	Scan

Repeatedly scans between two user-programmed fre- quencies. Used for checking for frequencies within a speci- fied range such as repeater output frequencies, etc.

MEMORY (SKIP) SCAN

(p. 28)

SKIP

M 1	M 2	M 3
M 0		M 4

Repeatedly scans memory channels except those set as skip channels. Skip channels can be turned ON and OFF by pushing [FUNC] + [V/M•S.MW•~] in memory

Jump

M 199 M 6 M 5

SKIP

mode.

ALL/SELECTED BANK			Repeatedly	scans all	bank
SCAN (p. 28)			channels or	selected	bank
	SKIP		channels. The skip scan is
A00	A01	A02	also available.
A99		A03
A98	A05	SKIP
		A04

FREQUENCY/MEMORY SKIP FUNCTION (p. 30)

Band		Band
edge		edge
	Scan
SKIP	Jump	SKIP

Skips unwanted frequencies or channels that inconve- niently stop scanning. This function can be turned ON and OFF by pushing [FUNC]

+[V/M•S.MW•~] in either VFO or memory mode.

25