Icom IC-R5 Programming memory/bank name, Rotate Dial to move the cursor to left or right

5 MEMORY CHANNELS

■Programming memory/bank name

Each memory channel can be programmed with an alphanu- meric channel name for easy recognition and can be indicated independently by channel. Names can be a maximum of 6 characters.

qPush [V/M•S.MW•~] to select memory mode.

wRotate [DIAL] to select the desired memory channel.

ePush [V/M•S.MW•~] for 1 sec. to select select memory write condition.

•1 short and 1 long beep sound.

•“ ” indicator and memory channel number blink.

FM DUP T SQL

rWhile pushing [MODE•SCAN], rotate [DIAL] to select “M NAME” or “B NAME” when programming the memory name or the bank name, respectively.

•The item can also be selected by pushing [MODE•SCAN] sev- eral times.

•After releasing [MODE•SCAN], an under bar blinks for the first

digit instead of the frequency indication, and only “” indicator blinks.

Memory name selection Bank name selection

tWhile pushing [FUNC], rotate [DIAL] to select the desired character.

•The selected character blinks.

yRotate [DIAL] to move the cursor to left or right.

Memory name Bank name

uRepeat steps t and y until the desired 6-character chan- nel names are displayed.

iPush [MODE•SCAN] several times, or rotate [DIAL] while pushing [MODE•SCAN] to select “S.MW” item.

oPush [V/M•S.MW•~] for 1 sec. to program the name and exit the channel name programming condition.

•3 beeps sound.

•Available characters

A to Z, 0 to 9, (, ), ✱, +, –, ,, /, , = and space.

NOTE: The bank name can only be programmed into each

bank. Therefore, previously programmed bank name will

be displayed when bank name indication is selected. And

also, the programmed bank name is assigned for the other bank channels automatically.

19