Icom IC-R5 Key lock effect, Dial speed acceleration, Monitor switch action, PWR and FUNC+BAND

9 SET MODE

DKey lock effect

While the key lock function is ON, [Y]/[Z] and [SQL] can still be accessed. Accessible switches can be set to one of 4 groups.

[PWR] and [FUNC]+[BAND•] are also accessible during the lock, however, these switches are not effected by this set- ting.

•NORMAL : [Y]/[Z] and [SQL] are accessible. (default)

•NO SQL : [SQL] is accessible.

•NO VOL : [Y]/[Z] are accessible.

• ALL	: No accessible switch is available, except
	[PWR] and [FUNC]+[BAND•	].

Normal lock condition Squelch level can be adjusted

Audio output can be adjusted	Receiver power and lock
	function only switchable

DDial speed acceleration

The dial speed acceleration automatically speeds up the tun- ing dial speed when rotating [DIAL] rapidly.

• ON	: The dial speed acceleration is tuned ON.
	(default)
• OFF	: The dial speed acceleration is turned OFF.

The acceleration ON The acceleration OFF

DMonitor switch action

The monitor switch, [SQL], can be set as a ‘sticky’ switch. When set to the sticky condition, each push of [SQL] toggles the monitor function ON and OFF.

•PUSH : Pushing and holding [SQL] to monitor the fre- quency. (default)

•HOLD : Push [SQL] momentarily to monitor the fre- quency and push momentarily again to cancel it.

Push to monitor Push and hold [SQL] to monitor

43