Icom IC-R5 Priority watch operation, Push Tsset to exit set mode and start the watch

7 PRIORITY WATCH

■Priority watch operation

DMemory channel watch and memory scan watch qSelect VFO mode; then, set an operating frequency.

•TV channel can also be selected.

wSet the watching channel(s).

For memory channel watch:

Select the desired memory channel.

For memory scan watch:

yPush [TS•SET] to exit set mode and start the watch.

•“PRIO” indicator appears.

•The receiver checks the memory/bank channel(s) every 5 sec.

•The watch resumes according to the selected scan resume con- dition. (p. 31)

Select memory mode, or the desired bank group; then,

push [MODE•SCAN] for 1 sec. to start memory/bank scan.

ePush [TS•SET] for 1 sec. to enter set mode. rRotate [DIAL] to select “PRIO” item.

tWhile pushing [FUNC], rotate to turn the priority watch ON.

•Select “BELL” if the priority beep function is necessary.

•During priority watch

FM	P SKIP
	PRIO

Monitors VFO frequency for 5 sec.

FM

PRIO

Pauses on a memory (bank) channel when a signal is received.

• Priority setting item

[DIAL]

[FUNC]

• Priority ON

[TS•SET]

• Priority beep ON

•During priority watch with priority beep

FM	P SKIP	FM
	PRIO	PRIO

Emits beep and blinks “S” indicator when a signal is received on a memory (bank) channel.

uPush [TS•SET] to cancel the watch.

33