Icom IC-R5 instruction manual Erasing/transferring bank contents

MEMORY CHANNELS 5

■Erasing/transferring bank contents

Contents of programmed memory channels can be or trans- ferred to another memory.

INFORMATION: Even if the memory bank contents are

cleared, the memory channel contents still remain pro- grammed.

qSelect the desired bank contents to be transferred or erased from the bank.

➥Push [V/M•S.MW•~] to select memory mode.

➥While pushing [BAND•], rotate the [DIAL] to select the desired memory bank group.

➥Rotate [DIAL] to select the bank channel.

•Bank initial stops blinking.

•Select the bank channel with [BAND•] and [DIAL], if de- sired.

•Bank initial blinks.

wPush [V/M•S.MW•~] for 1 sec. to enter select memory write condition.

•1 short and 1 long beeps sound.

•Displays the original memory channel number automatically and

“ ” indicator and memory channel number blink.

•Do not hold [V/M•S.MW•~] for more than 2 sec. otherwise the bank contents will be copied to VFO.

eWhile pushing [MODE•SCAN], rotate [DIAL] to select “BANK” item.

•Pushing [MODE•SCAN] several times, “BANK” item is also se- lectable.

rWhile pushing [BAND•], rotate [DIAL] to select the de-

sired bank group to be transfer. 5

•Select “-- -- -- --” indication when erasing the contents from the bank.

When transferring When erasing

tRotate [DIAL] to select the desired bank channel.

yWhile pushing [MODE•SCAN], rotate [DIAL] to select “S.MW” item.

•Pushing [MODE•SCAN] several times, “S.MW” item is also se- lectable.

uPush [V/M•S.MW•~] for 1 sec.

Push for 1 sec.

FM DUP T SQL FM DUP T SQL

24