Icom IC-R5 instruction manual Auto memory write scan, During auto-memory write scanning

6 SCAN OPERATION

■Auto memory write scan

This scan is useful for searching a specified frequency range and automatically storing busy frequencies into memory channels. The same frequency ranges used for program scan are used for auto memory write scan.

qSelect VFO mode with [V/M•S.MW•~].

wPush [MODE•SCAN] for 1 sec. to enter scanning type se- lection condition.

eRotate [DIAL] to select the desired scanning type.

•“ALL” for full scan; “BAND” for band scan, “PROGxx” for pro- grammed scan (xx= 0 to 24; programmed scan edges numbers only displayed)

rPush [MODE•SCAN] to start the scan.

tPush [V/M•S.MW•~] to turn the automatic memory write function ON and OFF.

•“ ” indicator blinks.

[DIAL]	• During auto memory
	write scan
	FM	P SKIP
[V/M•S.MW•~]
[MODE•SCAN]	“ ” indicator blinks dur-
	ing auto memory	write
	scan.

yPush [MODE•SCAN] to stop scan.

DDuring auto-memory write scanning:

•When signal is received, scan pauses and the frequency is stored into auto memory write channel group (R000–R199).

- 2 short beeps sound when stored.

•Scan resumes after frequency storing.

•When all channels are stored, the scan cancels automati- cally and 1 long beep sounds.

DRe-calling the stored frequencies:

qPush [V/M•S.MW•~] to select memory mode.

wPush [BAND•] several times, or while pushing

[BAND•], rotate [DIAL] to select the auto memory write channel group.

• “R” appears.

eRotate [DIAL] to select the desired channel.

FM

R

“R” appears when auto memory write channel group is selected.

DClearing the stored frequencies:

qSelect the auto memory write channel group.

wWhile pushing [FUNC], push [V/M•S.MW•~] for 1 sec. to clear the all channels contents.

• 1 short and 1 long beeps sound.

NOTE: The auto memory write channel contents CANNOT

be cleared by an independent channel. Thus it is good idea to copy the contents into regular memory channel.

29