Icom IC-R5 instruction manual Memory/bank/all bank scan, Select memory mode with V/MS.MW~

■Memory/bank/all bank scan

qSelect memory mode with [V/M•S.MW•~].

•Select the desired bank with [BAND•] for bank scan. wSet the squelch to the point where noise is just muted. ePush [MODE•SCAN] for 1 sec. to;

•When memory mode is selected at the step q:

-start memory scan.

•When a bank channel is selected at the step q:

-enter scan type selection mode.

rRotate [DIAL] to select the desired scanning type.

•“ALL” for all bank scan; “BANK” for bank scan.

[DIAL] • All bank scan selection

[MODE•SCAN] • Bank scan selection

SCAN OPERATION 6

tPush [MODE•SCAN] momentarily to start all bank or bank scan.

•Scan pauses when a signal is received.

•Rotate [DIAL] to change the scanning direction, or resumes manually.

yTo stop the scan, push [MODE•SCAN].

• During memory/all bank scan	• During bank scan	6
WFM AM DUP T SQL DTCS	WFM AM DUP T SQL DTCS

IMPORTANT!: To perform memory or bank scan, 2 or

more memory/bank channels MUST be programmed, oth- erwise the scan never starts.

28