4. Basic setup options
Setting top of form position
The
Press the Up or Down arrow keys to increase or decrease the TOF setting, respectively. Press the ENTER key to select the desired setting.
7 TOF ADJUST
TOF: + 0/60IN
TOF: +nnn/60IN
TOF: +480/60IN
........... Defaults to 14/60 inch
Note: Any improper setting of TOF position will set it back to the default value. The top of form differs from the top margin in that the top of form determines the first line of the print station where the top margin can be moved anywhere between the top of the form and the bottom margin. See "40 TOP MARGIN" on page 47.
Note
When using settings less then 14/60", the printer is more susceptible to a paper jam, depending on forms type being used.
Loading user & factory setup options
Loads one of three user designed setup options to the current active memory. This will erase and replace setup contents in the current memory. The printer has three setup storage areas that can store different setups. If you need to save the current setups before replacement, it is necessary to select the “86 SAVE SETUP” item in the extended setup options on page 56.
8 SELECT SETUP
SETUP: MEMO 1
SETUP: MEMO 2
SETUP: MEMO 3
SET.: FACTORY
Equivalent short cut operation can be performed when:
........... pressing the PARK key with the RESET key,
........... pressing the QUALITY key with the RESET key,
........... pressing the M.LF key with the RESET key.
Note: When this setting is executed, the printer will be initialized.
31
