9. Bar code and enlarged character
(8) End of the bar code data sequence: ESC SO
Format: | ASCII | ESC | SO |
| Hex | 1B | 0E |
| Decimal | 27 | 14 |
Function: | Indicates the end of a bar code data sequence. | ||
This command is valid only when #27 BARCODE/LABEL MODE is set
to MODE 2 in the EXTENDED SETUP MODE.
(9) Bar code data sequence: DC4 DC4 B |
|
|
|
|
|
|
|
|
Format: | ASCII | DC4 | DC4 | B | n | d1 d2 ... dk | ||
| Hex |
| 14 | 14 | 42 | n |
| |
| Decimal |
| 20 | 20 | 66 | n |
| |
Function: Specifies the number (“n”) of data to be regarded as bar code data. | ||||||||
| 00 ≤ | n ≤ | 68 |
|
|
|
| |
| 00 ≤ | dk ≤ | 255 |
|
|
| ||
| 00 ≤ | k ≤ |
| 68 |
|
|
|
|
If the Element is selected; | 0 | ≤ | n, dk, k ≤ | 255 |
|
| ||
This comand is valid when #27 BARCODE/LABEL MODE is set to MODE1 or | ||||||||
MODE2 in the EXTENDED SETUP MODE. |
|
| ||||||
(10) Printing density: DC4 DC4 D |
|
|
|
|
|
|
|
|
Format: | ASCII | DC4 | DC4 | D |
| n | ||
| Hex |
| 14 | 14 | 44 |
| n | |
| Decimal |
| 20 | 20 | 68 |
| n | |
Function: Specifies the density of printing bar code symbols (in the horizontal direction).
Specifies the unit of element width.
n = 0: Bar code symbols are printed at 120 dpi. (Default value)
1:Bar code symbols are printed at 180 dpi.
If a bar code is rotated by 90 or 270 degrees using the DC4 DC4 R (bar code
rotational angle) command, a bar code is printed at 120 dpi horizontally and 180
dpi vertically.
(11) Guard bar expansion: DC4 DC4 G |
|
|
|
|
|
Format: | ASCII | DC4 | DC4 | G | n |
| Hex | 14 | 14 | 47 | n |
| Decimal | 20 | 20 | 71 | n |
Function: Specifies whether or not to expand EAN or UPC guard bars.
n = 0: Guard bars are not expanded.
1: Guard bars are expanded. (Default value)
73
