Seiko Group BP-9000 owner manual Bar Code function, Bar Code command

9. Bar code and enlarged character

Bar Code function

	Inter Character Gap		Height
(Example) CODABAR
START	Wide Space	STOP	Barcode
Character		Character
	Narrow Space
Wide Bar		Check Character

Narrow Bar HRI

❏Bar Code command

				Function				Command
	1.	Bar code type				DC4 DC4 T
	2.	Element width				DC4 DC4 E
	3.	Bar code height				DC4 DC4 H
	4.	Setting HRI on and off				DC4 DC4 I
	5.	HRI font				DC4 DC4 F
	6.	Check character				DC4 DC4 C
	7.	Starting the bar code data sequence				ESC SI
	8.	Ending the bar code data seqence				ESC SO
	9.	Bar code data sequence				DC4 DC4 B
	10.	Printing density				DC4 DC4 D
	11.	Guard bar expansion				DC4 DC4 G
	12.	Start and stop characters				DC4 DC4 N
	13.	Bar code rotational angle				DC4 DC4 R
	14.	Disabling HRI of the start and stop characters				DC4 DC4 S
	15.	Value input mode				DC4 DC4 V
		16.		Initializing the bar code mode				DC4 DC4 @
(1)	DC4 DC4 T			Bar code type:
				Format: ASCII	DC4	DC4	T	n
				Hex	14	14	54	n
				Decimal	20	20	84	n

Function: Specifies the bar code type

n = 0	Industrial 2 of 5	7	Code128
1	Interleaved 2 of 5	8	EAN-8
2	Matrix 2 of 5	9	EAN-13
3	Codabar	10	UPC-A
4	Code11	11	UPC-E
5	Code39	12	Postnet
6	Code93	255	Element Print

Parameter 255 (Element print) is used to print a bar code which is input element by element. It can print a bar code which is not supported by the printer and is represented by combining elements. Since data is input by elements, HRI printing is not performed and no check digit is added to the bar code. The start and stop characters is also not added.

70