Seiko Group BP-9000 Outline of enlarged character function, Enlarged character command list

9. Bar code and enlarged character

Enlarged character function

If #27 BARCODE/ENLARGED CHAR is set to MODE 1 or MODE 2 in the EXTENDED SETUP MODE, enlarged characters can be printed. The enlarged character function is valid for the EPSON or IBM or HP mode.

❏Outline of enlarged character function

When the enlarged character mode is selected with the DC4 DC4 l 1 command, any commands other than those shown below are ignored.

Only three print codes are available: LF, CR and FF. If 521 or more characters of data are sent without inputting a print command, printing is performed automatically.

❏Enlarged character command list

	Function	Command
1.	Executing backspacing	BS
2.	Executing line feeding	LF
3.	Executing form feeding	FF
4.	Executing carriage return	CR
5.	Initializing the enlarged character mode	DC4 DC4 @
6.	Arrangement of enlarged characters	DC4 DC4 a
7.	Element magnification for enlarged characters	DC4 DC4 c
8.	All-character set for enlarged characters	DC4 DC4 d
9.	Selecting an enlarged character font	DC4 DC4 f
10.	Height expansion for enlarged characters	DC4 DC4 h
11.	HMI for enlarged characters	DC4 DC4 i
12.	VMI for enlarged characters	DC4 DC4 j
13.	Setting and canceling the enlarged character mode	DC4 DC4 l
14.	Enlarged character cell offset	DC4 DC4 o
15.	Enlarged character pitch	DC4 DC4 p
16.	Enlarged character quality	DC4 DC4 q
17.	Enlarged character rotational angle	DC4 DC4 r
18.	Setting and canceling enlarged character smoothing	DC4 DC4 s
19.	Enlarged character top offset	DC4 DC4 t
20.	Setting and canceling underscores for enlarged characters	DC4 DC4 u
21.	Enlarged character width expansion	DC4 DC4 w
22.	Horizontal printing position for enlarged characters	DC4	DC4	x
23.	Vertical printing position for enlarged characters	DC4	DC4	y

82