Seiko Group BP-9000 owner manual 120

B. Control code summary (HP)

	ITEM	SYMBOL	Hexadecimal Decimal	FUNCTION
[50]		ESC ) s # W	[1B,29,73,#,57] H DATA	Download font descriptor.
		[DATA]	[27,41,115,#,87] D DATA	- ESC ) s 0 W command resistors a blank LQ font.
				The format is as follows
					Byte 0-1	0	0
					Byte 2-3	0	0
					Byte 3-4	0	0
					Byte 5-6	0	0
					Byte 7-8	0	0
					Byte 9-10	0	0
					Byte 10-11	0	0
					Byte 12-13	0	0
					Byte 14-15	[ SYMBOL SET (2 BYTES)]
					Byte 16-17	0	0
					Byte 18-19	[ POINT SIZE	(2 BYTES)]
					Byte 20-21	0	0
					Byte 22-23	0	0
					Byte 24-25	0	[ TYPEFACE ]
					Byte 26-27	0	0
					Byte 28-29	[LQ/DRAFT]	0
				Symbol set : Byte 14-15 represent the symbol set # and
				ID for the download character to be selected by [37]
				ESC ( # id command.
					Example:Roman-8
					8U”
					32 x 8 + 85 - 64 = 277 (01H,15H)
				Point size(character height): Point size in decimal is
				registered.
				Typeface:Parameter used in the typeface selection
				command is registered.
				LQ/DRAFT:Print Quality, LQ or Draft is registered by
				the following definition;
					0:DRAFT 1:LQ
[51]		ESC * b # M	[1B,2A,62,#,4D] H	Selects format the graphic data compression
			[27,42,98,#,77] D	- Raster graphics data are registered. (Valid for PCL3+, PCL+D)
				# = 0		:compression off
				# = 1		:mode 1
				# = 2		:mode 2
				# = 3		:mode 3
	[52]	ESC * b # W	[1B,2A,62,#,57] H DATA	Raster graphic data transmission
		[DATA]	[27,42,98,#,87] D DATA	- Raster graphics data are registered.
	[53]	ESC * b # X	[1B,2A,62,#,58]H	Sets temporary graphics X-offset
			[27,42,98,#,88]D
	[54]	ESC * b # Y	[1B 2A 62 # 59]H	Sets temporary graphics Y-offset
			[27 42 98 # 89]D
[55]		ESC * c # E	[1B,2A,63,#,45]H	Sets download character code
			[27,42,99,#,69]D

120