Setup
Setup
Select SETUP when setting your TV up for the first time.
1. Use the CURSOR buttons or to highlight the function to be adjusted.
2.Press the SELECT button or CURSOR button to select.
MENU | Video |
Audio
Channel Manager
Locks
Timers
Setup
Move SEL Select
| Setup |
| |
OR | Magic Focus Tune Up | ||
Menu Preference | |||
| |||
| Set The Inputs | ||
| Set Closed Captions | ||
| Set Monitor Out | ||
| Upgrades |
| |
| Quick Start Up | ||
| Move | SEL Set | |
Magic Focus Tune Up
Auto Digital Convergence Adjustment
Please turn ON your television for at least 20 minutes before using this feature.
The MAGIC FOCUS button on control panel will not work when adjustment mode is set to MANUAL (see page 50 or 51).
Your HITACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called “convergence”.
Over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the TV. If you move your TV, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) the colors.
Properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. The output of the green tube is stationary. The outputs of the red and blue tubes can be adjusted. When properly aligned, the outputs of all three tubes should be directly over each other to produce the white lines.
MAGIC FOCUS
M A G I C F O C U S
>>>>> <<<<<
To simplify convergence, HITACHI incorporates a function called MAGIC FOCUS located on the front control panel, which allows the TV to
You may also select MAGIC FOCUS TUNE UP from the Setup Menu.
48
