Setup
Manual Convergence Adjustment Mode (9 Point Manual Adjustment)
NOTE: 1. Please turn ON your television for at least 20 minutes before using this feature.
2.AUTO ADJUSTMENT MODE is recommended. If convergence is still not acceptable, use the MANUAL
ADJUSTMENT MODE.
3.If AUTO ADJUSTMENT MODE is selected or the MAGIC FOCUS button is pressed, all manual adjust mode settings will be erased.
Using the Remote Control, select SETUP, MAGIC
FOCUS TUNE UP, MANUAL ADJUSTMENT MODE, 9
POINT MANUAL, START to access convergence 9 point pattern. The adjustment point is indicated by the Adjustment Point Cursor.
To Move Adjustment Point
To move the Adjustment Point Cursor using the CURSOR buttons, the Adjustment Point Cursor must be WHITE. Another way to move the Adjustment Point Cursor is to press the following buttons: [2] up, [4] left,
[5]down, [6] right. If you use the number buttons while the adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point Press the SELECT button repeatedly
To Adjust the Convergence
Move the Adjustment Point Cursor to the point to be adjusted. Use the CURSOR buttons to match the RED and BLUE colors to GREEN (reference color). Properly aligned, all three colors should appear white.
If convergence is acceptable after MANUAL CONVERGENCE adjustment, press EXIT button to access menu mode.
1.Use the CURSOR buttons to highlight your chosen option.
2.Press the SELECT button to select.
3.Select CANCEL to cancel adjusted data and return to main picture.
MENU | Video |
| Audio |
Channel Manager
Locks
Timers
Setup
Move SEL Select
Setup
Magic Focus Tune Up
Menu Preference
Set The Inputs
Set Closed Captions
Set Monitor Out
Upgrades
Quick Start Up
Move | SEL Set |
Setup |
|
|
Magic Focus Tune Up |
|
|
OR |
|
|
Align the Red, Green and Blue colors | ||
to correct for Magnetic Influences. | ||
Adjustment Mode | : | 9 Point Manual |
❑At Turn Off, after 90 days.
If you want to adjust now | Start |
Move SEL Return
Adjustment
Point
Cursor
EXIT | Setup |
Magic Focus Tune Up
Manual Adjust
Please make a selection from the options below.
Cancel Done Back Reset
Move SEL Return
4.Select DONE to save your adjustments and return to main picture.
5.Select BACK to return to the manual convergence adjustment mode.
6.Select RESET to recall the factory
50
