Section
02 
Basic Operations
Remote control
Operation is the same as when using the but- tons on the head unit. See the explanation of the head unit about the operation of each but- ton with the exception of PAUSE, which is ex- plained below.
ePAUSE button
Press to turn pause on or off.
fSOURCE button
This unit is turned on by selecting a source. Press to cycle through all the available sources.
gVOLUME button
Press to increase or decrease the volume. 
!AUX1 is set to on by default. Turn off the AUX1 when not in use (refer to Switching the auxili- ary setting on page 35).
!External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two exter- nal units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.
!When this unit’s blue/white lead is connected to the vehicle’s
this unit’s source is turned on. To retract the antenna, turn the source off. 
Turning the unit on and selecting a source
You can select a source you want to listen to. To switch to the
%Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources:
Notes
!In the following cases, the sound source will not change:
—When there is no unit corresponding to the selected source connected to this unit.
—When there is no disc in the unit.
—When there is no magazine in the multi- CD player.
—When the AUX (auxiliary input) is set to off (refer to page 35).
Adjusting the volume
%Use VOLUME to adjust the sound level. 
Turning the unit off
%Press SOURCE and hold until the unit turns off.
8 | En |
