Pioneer RDS DEH-P40MP Use and care of the remote control, Attaching the front panel

Section

01 Before You Start

Attaching the front panel

1Slide the front panel to the left until it clicks.

Front panel and the head unit are jointed on the left side. Make sure that the front panel has been jointed to the head unit.

2Press the right side of the front panel

until it is firmly seated.

# If you can’t attach the front panel to the head

unit successfully, try again. Front panel may be damaged if you attach the front panel forcedly.

Use and care of the remote control

Installing the battery

Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus (–) poles pointing in the proper di- rection.

WARNING

Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

CAUTION

!Use only one CR2025 (3 V) lithium battery.

!Remove the battery if the remote control is not used for a month or longer.

!Danger of explosion if battery is incorrectly re- placed. Replace only with the same or equiva- lent type.

!Do not handle the battery with metallic tools.

!Do not store the battery with metallic materi- als.

!In the event of battery leakage, wipe the re- mote control completely clean and install a new battery.

!When disposing of used batteries, please comply with governmental regulations or en- vironmental public institutions’ rules that apply in your country/area.

Using the remote control

Point the remote control in the direction of the front panel to operate.

Important

!Do not store the remote control in high tem- peratures or direct sunlight.

!The remote control may not function properly in direct sunlight.

!Do not let the remote control fall onto the

floor, where it may become jammed under the brake or accelerator pedal.

6 En