Pioneer RDS DEH-P40MP operation manual Tuner, Storing the strongest broadcast frequencies

Section

03 Tuner

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.

The next time you press the same preset tun- ing button the radio station frequency is re-

called from memory.

# You can also use a and b to recall radio sta-

tion frequencies assigned to preset tuning but- tons 1 to 6.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.

1Press FUNCTION to select BSM.

2Press a to turn BSM on.

Six strongest broadcast frequencies will be stored in the order of their signal strength.

#To cancel the storage process, press b.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1 Press FUNCTION to select LOCAL.

2Press a to turn local seek tuning on. Local seek sensitivity (e.g., LOCAL 2) appears

in the display.

# To turn local seek tuning off, press b.

3Press c or d to set the sensitivity. There are four levels of sensitivity for FM and two levels for MW/LW:

FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

MW/LW: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let you receive progressively weaker stations.

10 En