Tuner
Listening to the radio
1 2 3
5 4
1Band indicator
Shows which band the radio is tuned to, MW/LW or FM.
2Frequency indicator
Shows the frequency to which the tuner is tuned.
3Stereo (5) indicator
Shows when the selected frequency is being broadcast in stereo.
4Preset number indicator
Shows which preset has been selected.
5LOC indicator
Shows when local seek tuning is on.
1Press SOURCE to select the tuner. Press SOURCE until you see TUNER dis- played.
2Press BAND to select a band.
Press BAND until the desired band is dis- played, F1, F2 for FM or MW/LW.
3To perform manual tuning, briefly press c or d.
The frequencies move up or down step by step.
Section
03
4 To perform seek tuning, press and hold | English |
| |
c or d for about one second and release. |
|
The tuner will scan the frequencies until a |
|
broadcast strong enough for good reception is |
|
found. |
|
# You can cancel seek tuning by briefly pressing |
|
c or d. |
|
# If you press and hold c or d you can skip sta- |
|
tions. Seek tuning starts as soon as you release |
|
the button. |
|
Introduction of advanced tuner operation
%Press FUNCTION to display the function names.
Press FUNCTION repeatedly to switch be- tween the following functions:
BSM (best stations
quencies search)
# To return to the frequency display, press
BAND.
# If MW/LW band is selected, you can only se-
lect BSM or LOCAL.
# If you do not operate the function within about
30 seconds, the display is automatically returned to the frequency display. 
Storing and recalling broadcast frequencies
If you press any of the preset tuning buttons 1 to 6 you can easily store up to six broadcast frequencies for later recall with the touch of a button.
!Up to 12 FM stations, six for each of the two FM bands, and six MW/LW stations can be stored in memory.
En | 9 |
