Pioneer RDS DEH-P40MP operation manual Multi-CD Player Playing a CD

Section

07Multi-CD Player

Playing a CD

1 2 3

4

You can use this unit to control a multi-CD player, which is sold separately.

!Only those functions described in this man- ual are supported by 50-disc multi-CD players.

1Disc number indicator

Shows the disc number currently playing.

2Play time indicator

Shows the elapsed playing time of the cur- rent track.

3Track number indicator

Shows the track number currently playing.

4RPT indicator

Shows when repeat range is selected to cur- rent track.

1Press SOURCE to select the multi-CD player.

Press SOURCE until you see MULTI CD dis- played.

2Select a disc you want to listen to with the 1 to 6 buttons.

For discs 1 to 6, press the corresponding but- ton number.

For discs 7 to 12, press and hold the corre- sponding numbers, such as 1 for disc 7, until

the disc number appears in the display.

# You can also sequentially select a disc by pressing a/b.

3To perform fast forward or reverse, press and hold c or d.

4To skip back or forward to another track, press c or d.

Notes

!When the multi-CD player performs the pre- paratory operations, READY is displayed.

!If an error message such as ERROR-11 is dis- played, refer to the multi-CD player owner’s manual.

!If there are no discs in the multi-CD player ma- gazine, NO DISC is displayed.

!When you select a CD TEXT disc on a CD TEXT compatible multi-CD player, text information currently selected on Using CD TEXT functions

on page 26 automatically begins to scroll in the display.

Introduction of advanced multi-CD player operation

%Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch be- tween the following functions:

RPT (repeat play)—RDM (random play)— SCAN (scan play)—ITS-P (ITS play)—PAUSE

(pause)—COMP (compression and DBE)

# To return to the playback display, press BAND.

# If you do not operate the function within about

30 seconds, the display is automatically returned to the playback display.

22 En