Pioneer RDS DEH-P40MP Other Functions Using the AUX source, Selecting AUX as the source

Other Functions

Using the AUX source

This unit can control up to two auxiliary equip- ments such as VCR or portable devices (sold separately). When connected, auxiliary equip- ments are automatically read in as AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and AUX2 sources is explained below.

Selecting AUX as the source

%Press SOURCE to select AUX (AUX1 or AUX2) as the source.

Press SOURCE until AUX appears in the dis-

play.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on page 35.

Section

10

English

About AUX connection method

You have two methods to connect auxiliary equipments to this unit.

Stereo mini pin plug cable (AUX1)

When connecting auxiliary equipment using a stereo mini plug cable

%Insert the stereo mini plug into the AUX input jack on this unit.

For more details, refer to the installation man- ual.

The allocation of this auxiliary equipment is automatically set to AUX1.

IP-BUS-RCA interconnector (AUX2)

When connecting auxiliary equipment using an IP-BUS-RCA Interconnector (sold separately)

%Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary equipment featuring RCA output.

For more details, refer to the IP-BUS-RCA Inter-

connector owner’s manual.

# You can only make this type of connection if the auxiliary equipment has RCA outputs.

Setting the AUX title

The title displayed for each AUX1 or AUX2 source can be changed.

1After you have selected AUX as the source, press FUNCTION and hold until TITLE IN appears in the display.

2Press a or b to select a letter of the al- phabet.

Each press of a will display alphabet, num- bers or symbols in ascending order (A B C ...). Each press of b will display a letter in des- cending order.

3Press d to move the cursor to the next character position.

When the letter you want is displayed, press d to move the cursor to the next position and then select the next letter. Press c to move backwards in the display.

4Move the cursor to the last position by pressing d after entering the title.

When you press d one more time, the entered title is stored in memory.

5Press BAND to return to the playback display.

En 37