Pioneer RDS DEH-P40MP operation manual Built-in CD Player Playing a CD, Repeating play

Section

05Built-in CD Player

Playing a CD

1 2

3

1Play time indicator

Shows the elapsed playing time of the cur- rent track.

2Track number indicator

Shows the track number currently playing.

3RPT indicator

Shows when repeat play is turned on.

1Insert a CD into the CD loading slot. Playback will automatically start.

#Be sure to turn up the label side of a disc.

#After a CD has been inserted, press SOURCE to select the built-in CD player.

#You can eject a CD by pressing EJECT.

2To perform fast forward or reverse, press and hold c or d.

#If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current disc. (Refer to Searching every 10 tracks in the current disc on the next page.)

3To skip back or forward to another track, press c or d.

Notes

!Read the precautions with discs and player on page 38.

!If an error message such as ERROR-11 is dis- played, refer to Understanding built-in CD player error messages on page 38.

!When a CD TEXT disc is inserted, text informa- tion currently selected on Using CD TEXT func-

tions on page 17 automatically begins to scroll in the display.

Introduction of advanced built-in CD player operation

%Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch be- tween the following functions:

RPT (repeat play)—RDM (random play)— SCAN (scan play)—PAUSE (pause)—COMP (compression and BMX)—FF/REV (search

method)

# To return to the playback display, press BAND.

# If you do not operate the function within about

30 seconds, the display is automatically returned to the frequency display.

Repeating play

Repeat play lets you hear the same track or disc over again.

1Press FUNCTION to select RPT.

2Press c or d to select the repeat range.

!DSC – Repeat the current disc

!TRK – Repeat just the current track

Note

If you perform track search or fast forward/re- verse during TRK, the repeat play range changes to DSC.

14 En