Care & Maintenance/Troubleshooting
7
CARE AND MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat source.
3. Remove the batteries when the unit is not in use for an extended period
of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department on
01235 546810 (from UK) or +44 1235 546810 (outside UK) and a service
representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing Smart Start® products is accompanied by a
responsibility that we at VTech® take very seriously. We make every effort
to ensure the accuracy of the information, which forms the value of our
products. However, errors sometimes can occur. It is important for you to
know that we stand behind our products and encourage you to call our
Consumer Services Department on (01235) 546810 (from UK) or +44
1235 546810 (outside UK) with any problems and/or suggestions that
you might have. A service representative will be happy to help you.
61743 manual REV 4/19/04, 10:15 AM7