Pioneer RDS DEH-P40MP Other Functions, Setting the rear output and subwoofer controller

Section

10 Other Functions

Setting the rear output and subwoofer controller

This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker (R-SP :FUL) or subwoofer (R-SP :S/W) connection. If you switch the rear output setting to R-SP :S/W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp.

Initially, the unit is set for rear full-range speak- er connection (R-SP :FUL). When rear output is connected to full range speakers (when R-SP :FUL is selected), you can connect other full range speakers (P/O :FUL) or a subwoofer (P/O :S/W) to the RCA rear output.

1Press FUNCTION to select R-SP.

2Press a or b to switch the rear output setting.

Pressing a or b will switch between

R-SP :FUL (full-range speaker) and R-SP :S/W

(subwoofer) and that status will be displayed.

# When no subwoofer is connected to the rear

output, select R-SP :FUL.

# When a subwoofer is connected to the rear

output, set for subwoofer R-SP :S/W.

# When the rear output setting is R-SP :S/W, you cannot operate the following procedure.

3Press c or d to switch the subwoofer output or rear output.

Pressing c or d will switch between P/O :S/W and P/O :FUL and that status will be displayed.

Notes

!Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 33).

!If you change this setting, subwoofer output

in the audio menu return to the factory settings.

Multi language display setting

Text information such as title name, artist name or comment can be recorded on a WMA/MP3/WAV disc.

This unit can display them even if they are em- bedded in either European language or Rus- sian language.

!If embedded language and selected lan- guage setting are not consistent with each other, text information may not be dis- played properly.

!Some characters may not be displayed properly.

1Press FUNCTION to select TITLE.

2Press c or d to select the language.

EUR (European language)—RUS (Russian language)

Saving the battery consumption

Switching this function on enables you to save the consumption of battery power.

!Operations other than turning on the source are not allowed when this function is on.

Important

If the battery in your vehicle is disconnected the Power Save mode is canceled. Turn on Power Save again once the battery has been recon- nected. If the ignition switch in your vehicle doesn’t have an ACC (accessory) position, it is possible depending on the connection method that when Power Save is off, the unit will draw power from the battery.

1Press FUNCTION to select SAVE.

2Press a or b to turn the power save on or off.

36 En