Random Access Adjustment Mode
Convergence Adjustment
Convergence adjustments affect both the horizontal and vertical lines of the setup pattern. These adjustments are performed on the red image while superimposed on the green image and then on the blue image while superimposed on the green image.
Note : the green convergence adjustments can be added as an option. When these are available, start always with 'green only'. This option will also be indicated on the convergence menu.
Highlight first 'Green only' when available by pushing the control disk up or down and press ENTER to display the convergence adjustment menu.
The screen area is divided into 25 areas.
Use the control disk to move the box to the desired zone and then press ENTER to begin the convergence adjustment. Start the convergence adjustment with zone one and continue as mentioned in the diagram hereafter.
Use the control disk to make horizontal or vertical convergence adjustments in the selected zone and then press ENTER to move the box to another zone or EXIT to return to the Convergence menu.
ENTER toggles the control disk between zone selection and zone adjustment .
EXIT returns to convergence menu
| RANDOM ACCESS |
|
| |
| ADJUSTMENT MODE |
|
| |
| PICTURE TUNING |
|
| |
| GEOMETRY |
|
| |
| CONVERGENCE |
|
| |
| COLOR SELECT |
|
| |
|
| CONVERGENCE |
| |
|
| GREEN ONLY |
| |
|
| RED ON GREEN |
| |
|
| BLUE ON GREEN |
| |
|
| Select with | or |
|
|
| then <ENTER> |
| |
|
| <EXIT> to return. |
| |
25 | 23 | 9 | 15 | 17 |
24 | 22 | 8 | 14 | 16 |
5 | 4 | 1 | 2 | 3 |
20 | 18 | 6 | 10 | 12 |
21 | 19 | 7 | 11 | 13 |
|
| CONVERGENCE |
| |
SEL : select area using arrow keys
ADJ : adjust area using arrow keys
Toggle between SEL and ADJ with <ENTER> <ENTER> continue <EXIT> to return
CONVERGE
ADJUSTMENT
green image | 70 |
|
red image
5975977 BARCODATA 708 260597 |
| |
|
