Service Mode
Total Run Time
Highlight 'Total Run Time' with the control disk and press ENTER to display the amount of time the projector has played since its first start up at the factory.
ENTER gives the selected item.
EXIT returns to the Service mode menu.
ADJUST returns to the Operational mode.
Note : all projectors leave the factory after a
Change password
This item is password protected.
Highlight 'Change Password' with the control disk and press ENTER.
ENTER will display the selected item.
EXIT will return to the Path Selection main menu.
ADJUST will return to the Operational mode.
The current password is displayed. The new password must consist of 4 digits between 0 and 9. Push the control disk to the left or to the right to select the digits to be changed. Use the numeric keys to enter the new digits.
Press ENTER to save the new password. Before saving the new password, a confirmation screen will be displayed.
Press EXIT to return to the Projector
When the displayed password is correct, press ENTER to save. If not correct, press EXIT to cancel the saving.
ENTER saves the entered password.
EXIT returns without saving.
PROJECTOR | |
IDENTIFICATION | |
TOTAL RUN TIME | |
CHANGE PASSWORD | |
CHANGE LANGUAGE | |
CHANGE PROJECTOR ADDRESS | |
CHANGE BAUDRATE | |
POWER UP MODE : operating | |
BARCO LOGO | |
Select with | or |
then <ENTER> | |
<EXIT> to return. | |
PROJECTOR |
IDENTIFICATION |
TOTAL RUN TIME |
CHANGE PASSWORD |
CHANGE LANGUAGE |
CHANGE PROJECTOR ADDRESS |
CHANGE BAUDRATE |
POWER UP MODE : operating |
BARCO LOGO |
PASSWORD |
Enter new password : |
0 0 0 0 |
Use |
CHANGE PASSWORD |
Password will be |
reprogrammed as xxxx |
<ENTER> to confirm |
<EXIT> to cancel |
Change Language
The 'Change Language' function offers the possibility to change the language of the screen menus to :
-English
-Spanish
-French
-German
Highlight 'Change Language' with the control disk and press ENTER.
ENTER selects the Change language menu.
EXIT returns to the Service menu.
Push the control disk up or down to select the desired language and press ENTER to change the language.
PROJECTOR |
|
IDENTIFICATION |
|
TOTAL RUN TIME |
|
CHANGE PASSWORD |
|
CHANGE LANGUAGE |
|
CHANGE PROJECTOR ADDRESS |
|
CHANGE BAUDRATE |
|
POWER UP MODE : operating |
|
BARCO LOGO |
|
LANGUAGE | |
ENGLISH |
|
ESPAÑOL |
|
FRANCAIS |
|
DEUTSCH |
|
Select with | or |
then <ENTER> | |
<EXIT> to return. | |
5975977 BARCODATA 708 260597 |
| 7 - 3 |
|
