Random Access Adjustment Mode
Geometry Adjustments
The geometry adjustments have to be done only on the green image. These adjustments are automatically implemented for the other color images :
Highlight GEOMETRY by pushing the control disk up or down and press ENTER to display the geometry menu.
ENTER will display Geometry menu.
EXIT will return to Internal Crosshatch Selection or Setup Pattern Selection Menu.
ADJUST returns to operational mode.
Within the Geometry Adjustment menu, the following adjustments are available :
-Horizontal Phase (not for internal # pattern).
-Raster Shift
-
-
-Horizontal Size
-Vertical Linearity
-Vertical Size
-Blanking
The convergence corrections are disabled during geometry correc- tions. The blanking corrections are only enabled during the blanking adjustments.
Horizontal Phase Adjustment
Push the control disk up or down to highlight H PHASE on Geometry menu and then press ENTER.
Note : No horizontal phase adjustment is available on the internal # pattern.
For external sources :
If the raster shift is correctly adjusted, the H Phase text box is projected in the middle of the raster. At that moment, the "><" icon indicates the middle of the raster.
Adjust the H Phase control until the middle of the projected image is equal with the middle of >< icon.
Note :
-If the genlocked pattern was selected, the external source will be displayed.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
GEOMETRY
H
PHASE
RASTER SHIFT
SIZE
V LINEARITY
BLANKING
Select with 
or 
then <ENTER> <EXIT> to return.
GEOMETRY |
H PHASE |
RASTER SHIFT |
SIZE |
V LINEARITY |
BLANKING |
>< |
H PHASE |
70 |
A bar scale and a number indicator (between 0 and 100) on the screen give a visual indication of the horizontal phase adjustment.
ENTER continues to geometry menu .
5975977 BARCODATA 708 260597
Push the control disk to the right to correct
Push the control disk to the left to correct
><
H PHASE
70 |
>< |
H PHASE |
70 |
