Service Mode
Deletion of all blocks
Highlight 'delete all blocks' with the control disk and press ENTER.
ENTER gives a confirmation message before deleting. EXIT returns to the Path Selection main menu.
If you are certain you wish to delete all blocks, press ENTER to confirm, otherwise press EXIT to return.
Once ENTER is pressed, all block headers and adjustment settings are permanently removed and cannot be restored.
All settings to midposition
Item is password protected.
Highlight 'All settings to midposition' with the control disk and press ENTER to set all settings to their midposition.
A confirmation menu will be displayed first.
ENTER displays a Confirmation screen.
EXIT returns to the Service menu.
ENTER will set all settings to their midposition. EXIT will cancel the operation to set all settings to their midposition.
Undo all settings to midpos
When "All settings to midpos" is selected, all settings are set to their midposition. To cancel this action, select 'Undo all settings to midpos' by pushing the control disk up or down and press ENTER. 'Undo all settings to Midposition' is displayed in the Memory man- agement menu in stead off 'All settings to midposition' when this latter is pressed.
An undo is possible as long as the projector is playing on the same source (= same adjustment block) even when some adjustments as geometry or convergence are already readjusted. When undo is presssed all settings are reset to the previous settings.
MEMORY MANAGEMENT |
COPY A BLOCK |
DELETE A BLOCK |
DELETE ALL BLOCKS |
ALL SETTINGS TO MIDPOS |
R & B CONVERGENCE MID |
GR CONVERGENCE MID |
DELETE ALL BLOCK |
All block |
will be deleted ! |
<ENTER> to confirm |
<EXIT> to cancel |
MEMORY MANAGEMENT |
COPY A BLOCK |
DELETE A BLOCK |
DELETE ALL BLOCKS |
ALL SETTINGS TO MIDPOS |
R & B CONVERGENCE MID |
GR CONVERGENCE MID |
SET TO MIDPOSITION |
All settings |
on current block |
will be overwritten ! |
<ENTER> to confirm |
<EXIT> to cancel |
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with 
or
then <ENTER>
<EXIT> to return.
5975977 BARCODATA 708 260597 |
| 7 - 7 |
|
