Barco R9002120 Source No, Projector input, Press digit button, Connections, Video input selection

Connections

Source No	Projector input	Press digit button
1	Comp. Video	1
2	S-Video*/Comp. Video1	2
3	RGBS or RGsB**	3
3	RGB3S or RG3sB***	4
3	(R-Y)Y(B-Y)S or
	(R-Y)Ys(B-Y)****	5
3	(R-Y)Y(B-Y)3S or
	(R-Y)Y3s(B-Y)*****	6

Connecting a Composite Video source.

*Input signal Y/C (luma/chroma)

**Input signal : R, G and B with composite sync on G or separate composite sync

***Input signal : R, G and B with Tri level sync on G or separate Tri level sync.

****Input signal : R-Y, Y and B-Y with composite sync on Y or separate composite sync

*****Input signal : R-Y, Y and B-Y with Tri level sync on Y or separate Tri level sync.

1Video or S-Video : switchable in the Picture Tuning menu.

Composite video signals from a VCR, OFF air signal decoder, etc..

If a line doubler is built in :

the default position of this line doubler is ON (active), the video input signal will be displayed as a non interlaced image (= improved image stability).

To enable or to disable this line doubler function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see Picture tuning in chapter 'Guided' adjust- ment mode or 'Random access' adjustment mode).

		COMM PORT	R	G(S)	B			S-VIDEO
RS232 IN	RS232 OUT	(800 peripherals) REMOTE				S	VIDEO
			R-Y	Y(S)	B-Y

Composite video

Video input selection :

a. with the RCU : press digit button 1 or

b. with the local keypad.

(for access to the local keypad, see 'Local keypad' in chapter 'Location and function of controls'.)

-press ADJUST key, the General access menu is displayed on the screen.

-use the control disk to highlight 1.

-press ENTER to select the highlighted source.

TV tuner, e.g. TVDM40 stereo Audio amplifier

VCR

	GENERAL ACCESS
		SHARPNESS
		TINT
5	6	COLOR
3	4	BRIGHTNESS
1	2	CONTRAST

Enter ADJUST

Select with	,
	or
then <ENTER>.

<EXIT> to return

3 - 2 5975977 BARCODATA 708 260597