Random Access Adjustment Mode

Line Doubler (option)

Line doubling is only possible for Video, S-Video, Component Video images on standard line frequency and RGB signals on 15 kHz.

To eliminate the video line patterns and to improve the image stability, the line doubler has to be switched on. The line doubler is default set in the ON position when starting up for the first time. The setting of the line doubler will be saved together with the source number. Each time this source number is selected, the last saved version will be loaded.

Highlight Line Doubler with the control disk and press ENTER to toggle between ON (active) and OFF (non active).

EXIT will return to the random access selection menu.

Port 2 : S-Video/Video

Port 2 can be used as Video or S-Video input.

Highlight Port 2 by pushing the control disk up or down and press ENTER to toggle between Video and S-Video.

Peaking

Peaking improves the contours in an projected image.

Highlight PEAKING by pushing the control disk up or down and press ENTER to toggle the peaking between OFF and ON.

During the creation of new settings for a RGB source the peaking is switched to OFF.

Color Select

Highlight COLOR SELECT by pushing the control disk up or down and press ENTER to display the color select menu.

ENTER continues to the color select menu.

EXIT will return to Internal Crosshatch Selection or Setup Pattern Selection Menu.

ADJUST returns to operational mode.

Use the control disk to highlight a color (CRT) or combination of colors to display the projected image in that specific color.

To select a new color, press ENTER, the color selection menu appears again on the screen. To terminate the color select proce- dure, press EXIT.

ENTER continues with the selected color or color combina- tion.

EXIT returns to the Random access main menu.

PICTURE TUNING

COLOR BALANCE

SYNC : FAST

PEAKING : ON

Select with

or

<ENTER> to accept

<EXIT> to return.

PICTURE TUNING

COLOR BALANCE

SYNC : FAST

PEAKING :ON

LINE DOUBLER : ON

PORT 2 : S-VIDEO

Select with

or

<ENTER> to accept

<EXIT> to return.

PICTURE TUNING

COLOR BALANCE

SYNC : FAST

PEAKING : OFF

LINE DOUBLER : ON

Select with

or

<ENTER> to accept

<EXIT> to return.

RANDOM ACCESS

 

ADJUSTMENT MODE

 

PICTURE TUNING

 

GEOMETRY

 

CONVERGENCE

 

COLOR SELECT

 

COLOR SELECT

RED

 

GREEN

 

BLUE

 

RED AND GREEN

BLUE AND GREEN

RED AND BLUE

Select with

or

<ENTER> to accept

<EXIT> to return.

6-4

 

5975977 BARCODATA 708 260597

 

Page 30
Image 30
Barco R9002120 manual Line Doubler option, Port 2 S-Video/Video, Peaking, Color Select