Safety Instructions
5 | START UP OF THE ADJUSTMENT MODE |
|
Adjustment mode
All picture geometry and convergence adjustments are made while in the 'Adjustment mode'. Two possible ways to enter the adjustment mode :
a) Using the RCU.
Press the ADJUST key.
The projector displays the path selection menu.
b) Using the local keypad.
Press the ADJUST key.
The projector displays the General access menu.
Use the control disk to highlight enter ADJUST and press ENTER. The path selection menu will be displayed.
ADJUSTEXIT
STANDBYENTER
| GENERAL ACCESS | |
|
| SHARPNESS |
|
| TINT |
5 | 6 | COLOR |
3 | 4 | BRIGHTNESS |
1 | 2 | CONTRAST |
Enter ADJUST
Select with | , |
| or |
then <ENTER>. | |
<EXIT> to return
Note : to adjust the Analog picture control while in the 'Adjustment mode', press the ADJUST key. The next General Access menu will be displayed.
Push the control disk up or down to select the analog control to be adjusted and press the ENTER key to confirm.
When the analog control is adjusted the projector returns automatically to the General access menu. When you want to return to the Adjustment mode, press EXIT, otherwise select quit ADJUST and press ENTER to return to operational mode.
You are now in the 'Adjustment mode'. The control disk is used to make menu selections and also vertical and horizontal adjustments. The ENTER and EXIT keys are used to move forward and backward through the menu structure. The ADJUST key can be used to terminate the adjustment mode while a path selection menu (head menu) is displayed.
There are 5 possible paths to follow once in the Adjustment mode. They are :
INSTALLATION - Installation should be selected if the projector has been relocated and/or a different screen size is desired.
When selecting 'Installation', the user or operator will be warned to call a qualified technician to perform the installation procedure (see example of projected warning on next page).
GUIDED - Guided should be selected if the user intends to perform a complete alignment of the projected image. All of the necessary geometry and conver- gence adjustments are made in a predetermined sequence.
GENERAL ACCESS
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
quit ADJUST
Select with | , |
| or |
then <ENTER>. | |
<EXIT> to return
643
ADJUSTMENT MODE
Select a path from below:
GUIDED
RANDOM ACCESS 
INSTALLATION
SERVICE
IRIS
source 1
Select with 
or then <ENTER> <EXIT> to return
5975977 BARCODATA 708 260597 |
| |
|
