Service Mode
7 | SERVICE MODE |
|
Starting up the Service mode.
Use the control stick to highlight 'Service' and then press ENTER.
Some items in the Service mode are password protected (when the password function is active). Enter your password to continue. All other password protected items are now also available if you stay in the adjustment mode.
ENTER continues to the Service Mode main menu. EXIT returns to the Operational mode.
The service items are combined in two service menus. To switch from the first to the second menu or vice versa, push the control stick forward or backward to select 'more...'
ADJUSTMENT MODE |
|
Select a path from |
|
below : |
|
GUIDED |
|
RANDOM ACCESS |
|
INSTALLATION |
|
SERVICE |
|
IRIS |
|
source 1 |
|
SERVICE MODE | |
PROJECTOR | |
MEMORY MANAGEMENT | |
COMMON SETTINGS | |
I2C DIAGNOSTICS | |
Select with | or |
then <ENTER> | |
<EXIT> to return. | |
Overview flowchart 'Service' mode.
SERVICE MODE
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
PROJECTOR SET UP
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE
BARCO LOGO
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS MEMORY MANAGEMENT 
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
G2 ADJUSTMENT
CRT RUN IN CYCLE 
COMMON SETTINGS 
PROJECTOR WARM UP
CRT DRIVE MODE
I2C DIAGNOSTICS
5975977 BARCODATA 708 260597 |
| 7 - 1 |
|
