The system and the other setup 11
97
En
3 Confirm your selected setup option.
The test tones will start after you press ENTER.
4 Adjust the level of each channel using
/
.
If you selected MANUAL, use / to switch
speakers. The AUTO setup will output test
tones in the order shown on-screen:
Adjust the level of each speaker as the test tone
is emitted.1
5 When you’re finished, press
RETURN
.
You will return to the Manual SP Setup menu.
Tip
• You can change the channel levels at any
time by press , then press CH
LEVEL, and then using / on the
remote control.

Speaker Distance

For good sound depth and separation from
your system, you need to specify the distance
of your speakers from the listening position.
The receiver can then add the proper delay
needed for effective surround sound.
1 Select ‘
Speaker Distance
’ from the
Manual SP Setup
menu.
2 Adjust the distance of each speaker using
/
.
You can adjust the distance of each speaker in
1/2 inch increments.
3 When you’re finished, press
RETURN
.
You will return to the Manual SP Setup menu.
Tip
• For best surround sound, make sure the
surround back speakers are the same
distance from the listening position.
Note
1 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighting/slow reading).
• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual
soundtrack.
CAUTION
Loud test tones will be output.
Please wait...**
4a3.Channel Level
A/V RECEIVER
Exit Cancel
A/V RECEIVER
Exit Finish
MCACC : M1.MEMORY 1
L : 0.00 dB
4a3.Channel Level
C : 0.00 dB
R : 0.00 dB
SBR : 0.00 dB
SR : 0.00 dB
SBL : 0.00 dB
SL : 0.00 dB
SW : 0.00 dB
RECEIVER
1. Surr Back System
2. Speaker Setting
3. Channel Level
4. Speaker Distance
5. X-Curve
4a.Manual SP Setup
A/V RECEIVER
Exit Return
A/V RECEIVER
Exit Finish
MCACC : M1.MEMORY 1
L : 10’10”
4a4.Speaker Distance
C : 9’50-1/2”
R : 10’10”
SBR : 10’00”
SR : 9’00”
SBL : 10’00”
SL : 9’00”
SW : 12’10-1/2”
VSX-1019_KU.book Page 97 Thursday, January 8, 2009 12:01 PM