Pioneer VSX-919AH-K manual Speaker Distance, Acoustic Cal EQ

10The Advanced MCACC menu

1Select ‘Channel Level’ from the MCACC Data Check menu.

		2b.Channel Level
		A/V RECEIVER
MCACC : M1.MEMORY 1
L	:	0.0 dB
C	:	0.0 dB
R	:	0.0 dB
SR	:	0.0 dB
SBR	:	0.0 dB
SBL	:	0.0 dB
SL	:	0.0 dB
SW	:	0.0 dB
Exit		Return

2When ‘MCACC’ is highlighted, use / to select the MCACC preset you want to check.

The level of the various channels set at the selected MCACC preset is displayed. ‘---’ is displayed for channels that are not connected.

Speaker Distance

Use this to display the distance from the different channels to the listening position. See Speaker Distance on page 97 for more on this.

1Select ‘Speaker Distance’ from the MCACC Data Check menu.

		2c.Speaker Distance
		A/V RECEIVER
MCACC : M1.MEMORY 1
L	:	10’10”
C	:	10’10”
R	:	9’10”
SR	:	9’00”
SBR	:	6’00”
SBL	:	6’00”
SL	:	9’00”
SW	:	12’10”
Exit		Return

2When ‘MCACC’ is highlighted, use / to select the MCACC preset you want to check.

The distance from the various channels set at the selected MCACC preset is displayed. ‘---’ is displayed for channels that are not connected.

Standing Wave

Use this to display the standing wave related adjustment values for the various MCACC memories. See Standing Wave on page 85 for more on this.

90

1Select ‘Standing Wave’ from the MCACC Data Check menu.

	2d.Standing Wave
		A/V RECEIVER
Filter	Filter 1			Filter 2			Filter 3			TRIM
	Freq	Q	ATT Freq		Q	ATT	Freq Q		ATT
Channel	[Hz]		[dB]	[Hz]		[dB]	[Hz]		[dB]	[dB]
SW	63	5.0	10	120	5.0	10	201	5.0	10	+10.0
MCACC	dB
	0
M1.MEMORY1	5
	10
	16	32		63	125	250		500	1k	Hz
Exit									Return

2When ‘Filter Channel’ is highlighted, use / to select the channel for which you want to check standing wave control.

The standing wave related calibration value for the selected channel stored at the selected MCACC preset and its graph are displayed.

3Press  to highlight ‘MCACC’, then use / to select the MCACC preset you want to check.

Acoustic Cal EQ

Use this to display the calibration values for the frequency response of the various channels set in the different MCACC presets. See Acoustic Calibration EQ Adjust on page 85 for more on this.

1Select ‘Acoustic Cal EQ’ from the MCACC Data Check menu.

		2e.Acoustic Cal EQ
				A/V RECEIVER
											dB
Ch :	L	0.0	-8.0	-6.0	0.0	+3.0	+8.5	+8.5	+3.0	0.0	0.0
MCACC
M1.MEMORY1
		63	125	250	500	1k	2k	4k	8k	16k	TRIM
		[Hz]	[Hz]	[Hz]	[Hz]	[Hz]	[Hz]	[Hz]	[Hz]	[Hz]
Exit										Return

2When ‘Ch’ is highlighted, use / to select the channel.

The calibration value for the frequency response of the selected channel stored at the selected MCACC preset and its graph are displayed.

3Press  to highlight ‘MCACC’, then use / to select the MCACC preset you want to check.

En