Pioneer VSX-919AH-K manual Copying Mcacc preset data, Clearing Mcacc presets

10The Advanced MCACC menu

Copying MCACC preset data

If you want to manually adjust the Acoustic Calibration EQ (see Manual MCACC setup on page 82), we recommend copying your current settings1 to an unused MCACC preset. Instead of just a flat EQ curve, this will give you a reference point from which to start.

1Select ‘MCACC Memory Copy’ from the Data Management setup menu.

	3.Data Management
	A/V RECEIVER
a. Memory Rename
b. MCACC Memory Copy
c. MCACC Memory Clear
		3b.MCACC Memory Copy
			A/V RECEIVER
	Copy	:	All Data
	From	:	M1.MEMORY 1
Exit	To	:	M1.MEMORY 1
			Return
			OK

Exit Cancel

2Select the setting you want to copy.

•All Data – Copies all the settings of the selected MCACC preset memory.

•Level & Distance – Copies only the channel level and speaker distance settings of the selected MCACC preset memory.

3Select the MCACC preset you’ll be copying the settings ‘From’, then specify where you want to copy them (‘To’). Make sure you don’t overwrite an MCACC preset you’re currently using (this can’t be undone).

4Select ‘OK’ to confirm and copy the settings.

When MCACC Memory Copy? is displayed, select YES. If NO is selected, the memory is not copied.

Completed! shows in the GUI screen to confirm the MCACC preset has been copied, then you automatically return to the Data Management setup menu.

Clearing MCACC presets

If you are no longer using one of the MCACC presets stored in memory, you can choose to clear the calibration settings of that preset.

1Select ‘MCACC Memory Clear’ from the Data Management setup menu.

3.Data Management
A/V RECEIVER
a. Memory Rename
b. MCACC Memory Copy
c. MCACC Memory Clear
	3c.MCACC Memory Clear
		A/V RECEIVER
Clear	:	M1.MEMORY 1
Exit		Return
		OK

Exit Cancel

2Select the MCACC preset you want to clear.

Make sure you don’t clear an MCACC preset you’re currently using (this can’t be undone).

3Select ‘OK’ to confirm and clear the preset.

When MCACC Memory Clear? is displayed, select YES. If NO is selected, the memory is not cleared.

Completed! shows in the GUI screen to confirm the MCACC preset has been cleared, then you automatically return to the Data Management setup menu.

Note

1 The settings made in Automatically setting up for surround sound (Auto MCACC) on page 37 or Automatic MCACC (Expert) on page 78.

92

En