Pioneer VSX-919AH-K manual Input Setup menu, Problems when using the Auto Mcacc Setup

Basic Setup 04

7The Auto MCACC Setup procedure is

completed and the Home Menu menu reappears automatically.1

Be sure to disconnect the microphone from this receiver upon completion of the Auto MCACC Setup.

The settings made in the Auto MCACC Setup should give you excellent surround sound from your system, but it is also possible to adjust these settings manually using The Advanced MCACC menu on page 77 or The system and

the other setup on page 93.2

tell the receiver what equipment is hooked up to which terminal so the buttons on the remote control correspond to the components you’ve connected.

1Switch on the receiver and your TV. Use  RECEIVER to switch on.

2Press RECEIVER on the remote control, then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use /// and

ENTER to navigate through the screens and select menu items. Press RETURN to confirm

Problems when using the Auto MCACC Setup

If the room environment is not optimal for the Auto MCACC Setup (too much background noise, echo off the walls, obstacles blocking the speakers from the microphone) the final settings may be incorrect. Check for household appliances (air conditioner, fridge, fan, etc.), that may be affecting the environment and switch them off if necessary. If there are any instructions showing in the front panel display, please follow them.

•Some older TVs may interfere with the operation of the microphone. If this seems to be happening, switch off the TV when doing the Auto MCACC Setup.

The Input Setup menu

You only need to make settings in the Input Setup menu if you didn’t hook up your digital equipment according to the default settings (see Input function default and possible settings on page 40). In this case, you need to

and exit the current menu.

3Select ‘System Setup’ from the HOME MENU.

4Select ‘Input Setup’ from the System Setup menu.

	4.SystemSetup
	A/V RECEIVER
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
		4b.Input Setup
			A/V RECEIVER
	INPUT	:	DVD
	Input Name	:	Rename
	Input Skip	:	OFF
Exit	Digital In	:	COAX-1
	HDMI Input	:	Return
			---
	Component In	:	Comp-1

Exit Finish

5Select the input function that you want to set up.

The default names correspond with the names next to the terminals on the rear panel (such as DVD or VIDEO) which, in turn, correspond with the names on the remote control.

Note

1You can also choose to view the settings from the MCACC Data Check screen. See Checking MCACC Data on page 89 for more on this.

2• Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm (5 inches) will end up with different size settings. You can correct the setting manually using the Manual speaker setup on page 94.

•The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be accurate (taking delay and room characteristics into account) and generally does not need to be changed.

•If Auto MCACC Setup measurement results are incorrect due to the interaction of the speakers and viewing environment, we recommend adjusting the settings manually.

39

En