Pioneer VSX-919AH-K manual USB interface, Configuration B

Additional information 12

Configuration B

Connect your HDMI-equipped component directly to the display using an HDMI cable. Then use the most convenient connection (digital is recommended) for sending audio to the receiver. See the operating instructions for more on audio connections. Set the display volume to minimum when using this configuration.

Note

•If your display only has one HDMI terminal, you can only receive HDMI video from the connected component.

•Depending on the component, audio output may be limited to the number of channels available from the connected display unit (for example audio output is reduced to 2 channels for a monitor with stereo audio limitations).

•If you want to switch the input function, you’ll have to switch functions on both the receiver and your display unit.

•Since the sound is muted on the display when using the HDMI connection, you must adjust the volume on the display every time you switch input functions.

USB interface

Symptoms Causes Remedies

The folders/files stored on a USB memory device are not displayed.

The folders/files are currently stored	Store the folders/files in the FAT region.
in a region other than the FAT (File
Allocation Table) region.
The number of levels in a folder is	Limit the maximum number of levels in a
more than 8.	folder to 8 (page 45).
There are more than 30 000 folders/	Limit the maximum number of folders/files

files stored in a USB memory device. stored in a USB memory device to 30 000

	(page 45).
The audio files are copyrighted.	Copyrighted audio files stored on a USB
	memory device cannot be played back
	(page 45).

A USB memory device is not recognized.

The USB memory device does not	Try using a USB memory device compatible
support the mass storage class	with the mass storage class specifications.
specifications.	Note that there are cases where even the
	audio files stored on a USB memory device
	compatible with the mass storage class
	specifications are not played back on this
	receiver (page 45).
	Connect the USB memory device and
	switch on this receiver (page 35).

A USB hub is currently being used. This receiver does not support a USB hub (page 45).

This receiver recognizes the USB	Switch off and on again this receiver.
memory device as a fraud.

111

En