Pioneer VSX-919AH-K manual Connecting your equipment Connecting AM/FM antennas

03Connecting your equipment

Connecting AM/FM antennas

Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Connecting external antennas below).

Connecting external antennas

To improve FM reception connect an external FM antenna to the FM UNBAL 75 Ω.

5

1	2
	3

AM

LOOP

FM UNBAL 75

75 Ω coaxial cable

AM

LOOP

FM UNBAL 75

ANTENNA

	ANTENNA	4
fig. a	fig. b	fig. c

1Pull off the protective shields of both AM antenna wires.

2Push open the tabs, then insert one wire fully into each terminal, then release the tabs to secure the AM antenna wires.

3Fix the AM loop antenna to the attached stand.

To fix the stand to the antenna, bend in the direction indicated by the arrow (fig. a) then clip the loop onto the stand (fig. b).

•If you plan to mount the AM antenna to a wall or other surface, secure the stand with screws (fig. c) before clipping the loop to the stand. Make sure the reception is clear.

4Place the AM antenna on a flat surface and in a direction giving the best reception.

5Connect the FM wire antenna in the same way as the AM loop antenna.

For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.

30

To improve AM reception, connect a 5 m to 6 m (16 ft. to 20 ft.) length of vinyl-coated wire to the AM LOOP terminals without disconnecting the supplied AM loop antenna.

For the best possible reception, suspend horizontally outdoors.

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

AM
LOOP
FM
UNBAL
75	5 m to 6 m
ANTENNA	(16 ft. to 20 ft.)

En